Apple Power Macintosh 4400 - Manual (Page 80)

3 Plug the transceiver cable from the Ethernet transceiver into the standard AUI port on
the Apple Ethernet AUI Adapter.
4 Plug the adapter’s power cord into an electrical power outlet.
5 Plug the connector on the Apple Ethernet AUI Adapter into the AAUI Ethernet port on
your Macintosh.
6 Configure your network connection following the advice of your network administrator
and the instructions in “Configuring Your Network Connection” later in this chapter.
AAUI Ethernet port
Electrical outlet
Ethernet port (AAUI)
AAUI connector
Apple Ethernet AUI Adapter
Ethernet transceiver for other media
80 Chapter 5