Protecting your optical drive, Power supply, Cleaning your equipment – Apple Xserve (Slot Load) User Manual
Page 85: Cleaning the server’s case, Protecting your optical drive 85, Power supply 85, Cleaning your equipment 85, Cleaning the server’s case 85
Safety, Maintenance, and Ergonomics
85
Protecting Your Optical Drive
To keep your optical drive working properly:
m In an emergency, you can eject a disc by holding in the power button as the system
starts up.
m Do not wipe the lens with a paper towel or other abrasive surface. If you need to clean
the lens, see an Apple-authorized service provider for a lens cleaner.
You may want to take out your disc before shutting down.
Power Supply
The power supply in your computer is a high-voltage component and should not be opened
for any reason, even when the computer is off. If the power supply needs service, contact
your Apple-authorized dealer or service provider.
Cleaning Your Equipment
Follow these general rules when cleaning the outside of your server:
m Use a damp, soft, lint-free cloth to clean the computer’s exterior. Avoid getting moisture
in any openings.
m Don’t use aerosol sprays, solvents, or abrasives.
Cleaning the Server’s Case
To clean the case, do the following:
1
Turn off the computer completely and then disconnect the power plug. (Pull the plug, not
the cord.)
2
Wipe the surfaces lightly with a clean, soft cloth dampened with water.