Apple Xserve (Slot Load) - Manual (Page 4)

4 Contents
Installing the Server in a Two-Post (Telco) Rack 47
Connect Cables Directly to the Server 50
Disconnecting Cables From the Server’s Back Panel 51
Preparing the Server for Software Setup 51
4Using Your Server 53
Starting Up the Server 53
Monitoring Status Lights and Other Indicators on the Server 54
If the Server Has a Problem 55
What to Do If . . . 55
5 Installing or Replacing Server Components 57
Installing or Replacing an Apple Drive Module 59
Opening and Closing the Server 61
Adding Memory 65
Installing a PCI Card 68
About PCI Cards for the Server 68
Install a PCI Card in a Long Card Slot 69
Install a PCI Card in the PCI/AGP Card Slot 73
Replacing the Battery 77
Appendix A
Specifications 79
Processor and Memory Specifications 79
Dimensions and Operating Environment 79
Optical Drive Specifications 80
Ethernet Specifications 80
FireWire Specifications 80
USB Specifications 81
Serial Port Specifications 81
PCI Video Card Specifications 81
Power Supply 81
Power Requirements for Devices You Can Connect 82
System Clock and Battery 82