Apple Xserve (Slot Load) - Manual (Page 83)

83
A P P E N D I X
B
B
Safety, Maintenance, and Ergonomics
Important Safety Information
For your own safety and that of your equipment, always take the following precautions.
Disconnect the power plug (by pulling the plug, not the cord) if any of the following
conditions exists:
m you want to remove any parts (leave the cord disconnected as long as the cover is off )
m the power cord or plug becomes frayed or otherwise damaged
m you spill something into the case
m your server is exposed to rain or any other excess moisture
m your server has been dropped or the case has been otherwise damaged
m you suspect that your server needs service or repair
m you want to clean the case (use only the recommended procedure described later)
Be sure that you always do the following:
m Keep your server away from sources of liquids, such as washbasins, bathtubs, shower
stalls, and so on.
m Protect your server from dampness or wet weather, such as rain, snow, and so on.
m Read all the installation instructions carefully before you plug your server into a wall
socket or power strip.
m Keep these instructions handy for reference by you and others.
m Follow all instructions and warnings dealing with your system.
Electrical equipment may be hazardous if misused. Operation of this product, or similar
products, must always be supervised by an adult. Do not allow children access to the interior
of any electrical product and do not permit them to handle any cables.
Important The only way to shut off power completely is to unplug the power cord. Make
sure at least one end of the power cord is within easy reach so that you can unplug the server
when you need to.