AEM 30-6905 Universal Programmable EMS-4 - Manual (Page 26)

Page 26 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
TPS (Throttle Position Sensor)
Harness Connections
TPS Harness Connections
Name Wire
Wire
Color Stamping
+5.0 volts, Vcc 22 Red VCC
Throttle Position Sensor 22 White THROTTLE
Sensor Ground 22 Black SIG GND
VCC – Connect to sensor 5 volt reference
THROTTLE – Connect to sensor signal
SIG GND – Connect to sensor ground
MAP Sensor
Harness Connections
MAP sensor harness connections
Name Wire
Wire
Color Stamping
+5.0 volts, Vcc 22 Red VCC
Manifold Pressure
Sensor
22 White MAP
Sensor Ground 22 Black SIG GND
VCC
– Connect to sensor 5 volt reference
MAP – Connect to sensor signal
SIG GND – Connect to sensor ground
Optional AEM MAP Sensor Listing:
AEM P/N 30-2130-30 “MAP Sensor Kit, 2 BAR”
Typically used to measure intake, air box and crankcase pressures.
AEM P/N 30-2130-50 “MAP Sensor Kit, 3.5 BAR”
Typically used to measure intake & exhaust back pressures.