beautypg.com

AEM 30-6905 Universal Programmable EMS-4 User Manual

Page 217

background image

Page 217 of 279 EMS-4 Install and Tuning Guide_Rev 1.6

1/0.033 = 30.3 Hz

These setting would configure the EMS to output a 30 Hz duty cycle switched ground output on
pin GPIO7.

The Boost WG Base Duty table example above contains a 50% duty cycle setting everywhere.
This table combined with the options above will result in the following output waveform on the
GPIO7 pin after a power cycle: