Defi ADVANCE ZD User Manual

Page 8

6 Part names/Dimensions in mm(inches)

■ Buttons

In this manual, the SELECT button and the SET button are illustrated as follows:

SELECT

SET

■ Installation diagram

The meter wire can be connected to both two connectors of METER OUTPUT.
Up to 7 gauges and displays in all can be connected to one control unit. (Ex. If
7 gauges are connected to one line, none can be connected to the other line.
If three gauges are connected to one line, up to 4 gauges can be connected to
the other line.)
※ Do not connect more than one gauge of the same variety. (Ex. You can NOT

connect 2 turbo gauges together.) However, several ZDs can be connected.

OLED Display

73(2.9)★

86(3.4)(ZD movable range★)

42(1.7)

96.4(3.8)

26.7(1)

88.2(3.5)

45.(1.8)

17.3(0.7)

27.8(1.1)

51.8(2)

61.5(2.4)

DIM Sensor SELECT button SET button

Sequential Indicator(8 LEDs)

Mounting bracket Brace Knob

Connector for external switch(unused)

※External switch is not on sale yet.

Connectors

for meter wires

Connector for

ADVANCE indicator

(Sold separately)

【Front】

【Backside】

【Side】

Sensor Wires

→Sensors

→Connect to vehicle

Power source wire

→Connect to vehicle

Switch unit

Meter wire

ADVANCE

Control Unit