Defi ADVANCE ZD User Manual

Page 11

8 -2. System setup mode (S1)

Set the speed pulse, number of cylinders, tachometer response, and so on.
If ADVANCE tachometer is installed and number of cylinders and tachometer
response are already set, the settings are applied to ZD.

Caution

Make sure all the setting is done correctly. The product doesn’t operate properly.

Set up while the vehicle is stopped.

CU OPR

(slide switch position：

)

1. Set the slide switch to

2. By pressing

button long,

the display shifts to system setup mode,
and SYSTEM SETUP menu is displayed. UNIT
setup is highlighted at the start.

3. Choose the item to change by pressing

button. By press-

ing the

button, the item to

setup is highlighted.

4. Change the setting properly by pressing

button.

By pressing

button, the setting is framed and set.

5. Return the slide switch to

after all the settings are

done.

Setting items

On the screen

Default

Units setting

UNIT

km/h ・kPa・℃

Speed pulses setting

SPEED PULSES

Number of cylinders setting

ENGINE CYLINDERS

Tachometer response setting

TACHO RESPONSE

１：HIGH

Dimmer setting

DIMMER

Manual

Special display setting

SPECIAL MODE

Warm-up setting

WARM UP MODE

OFF

Clock setting

CLOCK

1:00(+B ON)

8 -2-1. Units setting [UNIT]

Choose [UNIT] by pressing

button, and then press

button. Choose [km/h ・kPa・℃ ] or [MPH・PSI・°F] by

pressing

button, and then press

button.

8 -2-2. Speed pulse setting [SPEED PULSES]

Choose [SPEED PULSES] by pressing

button, and

then press

button. Choose proper speed pulse by pressing

button, and then press

button.

■ Pulse free setting

1. If your vehicle is not 2, 4, 8, or 16 pulse, choose FREE and press

button.

2. If you set the pulse now, select NEW VALUE

by pressing

button and press

but-

ton. If you do not set the pulse now,
select CURRENT VALUE. by pressing

button and press

button.

3. After NEW VALUE is selected, press

button when the built-

in speedometer of your vehicle indicates
60km/h or 40MPH.