Defi ADVANCE ZD User Manual

Page 16

8 -4. Display item change

There are 4 display modes (STREET, GAUGE1, GAUGE2, and TIME ATTACK). The
sizes and positions of display items can be changed in each display mode.
(The default display mode is STREET after the opening mode is performed.)
⇒ Refer to 8 -6-2. Real mode for display modes
Changes in positions (zones) and sizes are limited differently in each display
mode.
⇒ Refer to 8 -6-2-5, 8 -6-2-6, and 8 -6-2-7. for changeable zone.

Display is divided into 6 zones (Zone A), and the size of each zone can be
changed as following figure (Zone B and C):

Zone A1

Zone A2

Zone A3

Zone A4

Zone A5

Zone A6

Zone B1
Zone B2

Zone A5

Zone A6

Zone C1

Zone C2

Zone A5

Zone A6

Items which can be selected

Zone A： Basic style

Zone B： Expanded style and REV BAR

Zone C： Graph style
(Graph showing –15 to +5℃ (°F) of warning value & basic display & warning set value)

CU OPR

(slide switch position：

)

1. Set the slide switch to

2. Press

and

buttons at the same time. Zone1

changes to check.

3. Choose a zone to change by pressing

button.

4. Choose zone A, B, or C by pressing

buttons.

　Zone A1 B1 C1 Zone A3 B2 Zone A2 C2

　⇒ Refer to 8 -6-2-5, 8 -6-2-6, and 8 -6-2-7. for changeable zone.
　By pressing

button, the zone is highlighted.

5. Press

button to select an item to display in the

zone. Then press

button to set.

6. Return the slide switch to

after all the settings are

done.

※ Zone A5 is a multi-display zone. When the dimmer level is changed, etc.,

the message is displayed in the multi-display zone for a moment even while
the set item is displayed. When values exceed the warning settings, etc.,
the warning message is also displayed in the multi-display zone automati-
cally. Do not set an item you want to check all the time in the multi-display
zone.