Defi ADVANCE ZD - Manual (Page 21)

■ Clearing the best score
ZD OPR
1. Time attack menu appears by pressing R SET button.
2. Highlight [SET UP] by pressing L SELECT button., and then press
R SET button.
3. Highlight the score to delete by pressing
L SELECT button.
4. Press R SET button. The score is cleared
and the best time display indicate 0:00:00.
5. Highlight [RETURN] by pressing L SELECT button., and then press
R SET button to return to the time attack menu.
6. Highlight [RETURN] by pressing L SELECT button, and then return to the
time attack display by pressing R SET button.
8 -6-3. Real peak mode
The peak values recorded while driving and idling are displayed during real
mode. The maximum and minimum values are displayed in order as for oil
pressure and fuel pressure. The peak values can be reset.
The peak value of fuel pressure is displayed in
the fuel pressure zone even while displaying dif-
ferential pressure.
▲ PEAK is displayed in multi-display zone (Zone
A5) during peak mode.
CU OPR (slide switch position： U )
IF NEITHER OIL PRESSURE NOR FUEL PRESSURE SENSOR IS CONNECTED:
1. Set the slide switch to
U .
2. Press M button to change the display to real peak mode.
3. By pressing M button, the display shifts to real mode.
IF EITHER OIL PRESSURE OR FUEL PRESSURE SENSOR IS CONNECTED:
1. Set the slide switch to
U .
2. Press M button to change the display to real peak mode (maximum
value).
3. Press M button again to change the display to real peak mode (minimum
value of oil pressure and fuel pressure ).
4. By pressing M button, the display shifts to real mode.
8 -6-4. Real peak reset mode
Peak values can be reset. Regarding oil pressure
and fuel pressure, both the maximum value and
the minimum value are reset. PEAK RESET is
displayed for one second in multi-display zone
(Zone A5) during peak reset mode.
CU OPR (slide switch position： U )
1. Set the slide switch to U .
2. Press M button to change the display to real peak mode.
3. By pressing R button, the peak values are reset and he display
shifts to real mode.
8 -6-5. Record mode
Driving data can be recorded up to 3 minutes.
● REC and recording time are displayed in
multi-display zone (Zone A5) during record
mode.
CU OPR (slide switch position： U )
1. Set the slide switch to U .
2. Press L button to change the display to record mode.
3. Recording is terminated by pressing L button again or after 3
minutes go by from start of recording. And then the display shifts to real
mode.
8 -6-6. Rec peak mode
The peak values recorded while recording are displayed during record mode.
The maximum and minimum values are displayed for oil pressure and fuel
pressure. The peak value of fuel pressure is displayed in the fuel pressure zone
89 90