Defi ADVANCE ZD User Manual

Page 12

4. The speed pulse is within the limits of set-

ting, COMPLETED is displayed and buzzer
sounds. Press

button to set.

When the speed pulse is NOT within the
limits of setting, INCOMPLETED is displayed.
Press

button to return the

system setup mode.

※ Ask fellow passengers to set up. Do not set up at the wheel.
※ It may be unable to be adapted for some models of vehicles.

8 -2-3. Number of cylinders setting [ENGINE CYLINDERS]

Choose [ENGINE CYLINDERS] by pressing

button,

and then press

button. Choose proper number of cylinders

by pressing

button, and then press

button.

※ When setting the number of cylinders for

a rotary engine, set it to 4 cylinders for 2
rotors(setting of RX-8 is 2 cylinders), and to
6 cylinders for 3 rotors.

8 -2-4 Tachometer response setting [TACHO RESPONSE]

Choose [TACHO RESPONSE] by pressing

button,

and then press

button. Choose preferred number of level by

pressing

button, and then press

button. Check the actual response and select your preferred level.

8 -2-5. Dimmer setting [DIMMER]

Choose [DIMMER] by pressing

button, and then

press

button. Select [AUTO] or [MANUAL] by pressing

button, and then press

button.

If [AUTO] is selected, the brightness of display is adjusted automatically de-
pending on the outside light. If [MANUAL] is selected, the brightness of dis-
play is fixed. AUTO level can be selected from 4 levels (3 automatic levels and
constant maximum brightness level) by pressing

button in

real mode or record mode. (It is easy to realize the difference between 3 levels
in dark place.)
MANUAL level can be selected from 5 levels
(one more constant maximum brightness level
in nighttime) by pressing

but-

ton in real mode or record mode.
⇒ Refer to

-6-1. Refer to brightness adjustment.

8 -2-6. Special display setting [SPECIAL MODE]

Choose [SPECIAL MODE] by pressing

button, and then

press

button. Select [ON] or

[OFF] by pressing

button, and then press

button.

If [ON] is selected, a graphic animation is played after the speed signal keeps
0km/h(0MPH) for more than 10 seconds.