Defi ADVANCE ZD - Manual (Page 3)

This product is an additional product for providing information to automobile
users about engine conditions and other important factors. When installing
and operating this product, be sure to read the cautionary items of this opera-
tion manual as well as those given in the operation manual for the vehicle in
which this product will be installed. Please obtain a full understanding of the
cautionary items and use the product accordingly.
In the event that this product (or the vehicle in which it is installed) is lent to or
transferred to another person, please be sure this operation manual and war-
ranty card accompany the product.
In this manual, the degree of hazard arising from actions such as improper
operation is separated into the 3 levels "Danger," "Warning," and "Caution."
In addition, instructions that must be followed for safe and proper use of this
product as well as practices that must be maintained are marked with a "Con-
firmation" heading. Please read and become familiar with these sections.
Danger
Indicates the imminent dangerous situation of death or seri-
ous injury if the product is mishandled
Warning
Indicates the possibility of death or serious injury if the prod-
uct is mishandled.
Caution
Indicates a conceivable source of personal injury or damage
to equipment if the product is improperly operated.
Confirmation
Indicates an instruction that must be performed or practice
that must be maintained.
Properties for safety warning
Indicates attention needs to be paid. (Including warnings)
Prohibited Indicates restricted actions. (PROHIBITED actions)
Must Indicates actions that need to be carried out. (MUST actions)
1 Safety Warning 【Please read carefully.】
■ Before handling (for installation personnel)
Danger
Ensure that the vehicle will remain stationary and turn off the engine before
installing this product. Failure to do so could result in a fire, and could make
the vehicle move during installation.
Remove the key from the ignition and disconnect the negative (-) battery
terminal prior to installation of this product. Failure to do so could result in
a fire caused by an electrical short circuit.
Take care not to install this product in a way that interferes with safety equip-
ment such as seat belts and air bag systems or vehicle operation equipment
such as engine controls, steering wheel and brake systems. Interference
with normal operation of the vehicle can result in an accident or fire.
Solder or use a solderless connector for wiring connections and make sure
connections are insulated. In areas where there could be tension or sud-
den impacts on the wiring, safeguard the wiring with corrugated tubing or
other shock absorbent material. Accidental shorts can cause fires.
While wiring power supply wire, to avoid the risk of electrical shock or fire,
be sure to confirm that there is no disconnection or breakage of wire. Poor
connection can result in short-circuit, electrical shock, fire, or other hazards.
The ignition-switched +12V(IGN) line must be connected to the vehicle's
ignition-switched wire with a fuse of 30A or less. High-capacity fuse(more
than 30A) will not blowout even with an abnormal current flow and may
cause fire.
Discontinue use of this product if a blowout of the fuse has occurred. Con-
tinued use while the condition exists could result in an accident, fire, or
damage to the vehicle.
Use the tube fuse of regulated capacity when the fuse of the power wire is
changed. Using a fuse that exceeds regulated capacity may cause fire.
Do not install the product in wet places. It may result in a fire caused by an
electrical short circuit.
Discontinue use of this product if the product doesn't operate or operates
improperly. Continued use while the condition exists could result in an ac-
cident or damage.
This product functions with Defi-Link ADVANCE Control unit. This
product alone does not function. Please refer to Defi-Link ADVANCE
Control unit operation manual as well.
53 54