Defi ADVANCE ZD User Manual
Page 22
even while displaying differential pressure.
●▲ REC PEAK is displayed in multi-display zone
(Zone A5) during rec peak mode.
CU OPR
(slide switch position：
U
)
IF NEITHER OIL PRESSURE NOR FUEL PRESSURE SENSOR IS CONNECTED:
1. By pressing
M
button in rec mode, the display shifts to rec peak mode.
2. Press
M
button to shifts to record mode. Or press
L
button to shift to real mode. Recording is terminated after 3 minutes go by
from start of recording, and then the display shifts to real mode.
IF EITHER OIL PRESSURE OR FUEL PRESSURE SENSOR IS CONNECTED:
1. By pressing
M
button in rec mode, the display shifts to rec peak
mode (maximum value).
3. Press
M
button again to change the display to rec peak mode
(minimum value of oil pressure and fuel pressure).
3. Press
M
button to shifts to record mode. Or press
L
button to shift to real mode. Recording is terminated after 3 minutes go by
from start of recording, and then the display shifts to real mode.
8 -6-7. Playback mode
Recorded data is replayed. Pausing, fast- forwarding, rewinding, single frame
forwarding, and single frame rewinding for data are possible.
PLAY and the playback time are displayed in
multi-display zone (Zone A5) during playback
mode.
CU OPR
(slide switch position：
M
)
1. Set the slide switch to
M
.
2. The recorded data is replayed by pressing
L
button.
3. Playback is stopped by pressing
L
button or when the data is
replayed to the end. And then the display shifts to real mode.
8 -6-7-1. How to operate recording data
■ Pause
To stop replaying, press
M
button or
R
button during payback. Data is
replayed again by pressing
L
button.
II PAUSE is displayed in multi-display zone
(Zone A5) during pause.
■ Fast-forward, single frame forward
To fast-forward single frames, press
R
button. To fast-forward, press
R
but-
ton long. II PAUSE is displayed in multi-display
zone (Zone A5) during fast-forward of single
frames.
PLAY is displayed in multi-display zone
(Zone A5) during fast-forward.
■ Rewind, single frame rewind
To rewind single frames, press
M
but-
ton. To rewind, press
M
button long.
II PAUSE is displayed in multi-display zone
(Zone A5) during rewind of single frames.
PLAY is displayed in multi-display zone
(Zone A5) during rewind.
※ The single frame is 0.02 seconds.
8 -6-8. Play peak mode
The peak values recorded while recording are
displayed during playback mode. The maximum
and minimum values are displayed in order as
for oil pressure and fuel pressure.
▲ PLAY PEAK is displayed in multi-display zone (Zone A5) during play peak mode.
91
92