Defi ADVANCE Control Unit (DF07703 Manufactured in and before January, 2012) - Manual (Page 33)

IF NEITHER OIL PRESSURE NOR FUEL PRESSURE SENSOR IS CONNECTED:
1. If the
M
button is pressed during Rec mode, the gauge shifts to
Rec Peak mode. The LED is lighted up during Rec Peak mode.
2. If the
M
button is pressed again, the gauge returns to Rec mode.
And then if the
L
button is pressed, the gauge returns to Real
mode. Or after 3 minutes have passed from recording, the mode returns to
Real mode.
IF EITHER OIL PRESSURE OR FUEL PRESSURE SENSOR IS CONNECTED:
1. If the
M
button is pressed during Rec mode, the gauge shifts
to Rec Peak mode (maximum value). All the connected gauges display
maximum values. The LED is lighted up during Rec Peak mode.
2. If the
M
button is pressed again, the gauge shifts to Rec Peak
mode (minimum value). All the connected gauges except oil pressure and
fuel pressure display maximum values. The LED is lighted up during Rec
Peak mode.
3. If the
M
button is pressed again, the gauge returns to Rec mode.
And then if the
L
button is pressed, the gauge returns to Real
mode. Or after 3 minutes have passed from recording, the mode returns to
Real mode.
7 -11. Playback mode (slide switch position: M )
Recorded data can be replayed. Pausing, fast-forwarding, rewinding, single
frame forwarding, and single frame rewinding are possible.
1. Set the slide switch to M .
2. If the L button is pressed, the gauge shifts to Playback mode and
play the recorded data. The LED is blinking during Playback mode.
3. When playback finishes or the L button is pressed during play-
back, the gauge returns to Real mode.
The illumination of gauges can be turned off during Playback mode.
⇒ Refer to 7 -3-3. Illumination.
71