Defi ADVANCE Control Unit (DF07703 Manufactured in and before January, 2012) - Manual (Page 31)

it is possible to offset and adjust the needle pointer.
1. Set the slide switch to L .
2. If the L button is pressed, the gauge shifts to Setup mode.
3. Select the gauge by pressing L button.
4. Press long L to adjust the gauge. The adjustment is confirmed
by a short beep sound.
5. Return the slide switch to U or M .
7 -7. Real Peak mode (slide switch position : U )
The peak values recorded while driving and idling are displayed during Real
mode. The maximum and minimum values are displayed in order as for oil
pressure and fuel pressure. The peak values can be reset. The peak value of
fuel pressure is displayed in the fuel pressure zone even while displaying the
differential pressure.
IF NEITHER OIL PRESSURE NOR FUEL PRESSURE SENSOR IS CONNECTED:
1. Set the slide switch to
U .
2. If the M button is pressed, the gauge shifts to Real Peak mode. The
LED is lighted up during Real Peak mode.
3. If the M button is pressed, the gauge shifts to Real mode.
IF EITHER OIL PRESSURE OR FUEL PRESSURE SENSOR IS CONNECTED:
1. Set the slide switch to
U .
2. If the M button is pressed, the gauge shifts to Real Peak mode
(maximum value). All the connected gauges display maximum values. The
LED is lighted up during Real Peak mode.
3. If the M button is pressed again, the gauge shifts to Real Peak
mode (minimum value). All the connected gauges except oil pressure and
fuel pressure display maximum values. The LED is lighted up during Real
Peak mode.
4. If the M button is pressed, the gauge shifts to Real mode.
69