Bay Technical Associates BayStack ARN Routers none - Manual (Page 113)

Using Local Boot (the Quick-Start Procedure)
114200 Rev. A B-11
Wide Area Protocol Worksheets
This section contains requested information and possible options relating to wide
area protocol choices on the Global Worksheet.
Follow the default route for unknown
subnets? (y/n) [n]: y(es)
n(o)
The default route does not apply
for subnets unless you enter y at
this prompt.
Bay Networks Proprietary PPP Worksheet
Requested Information Options Your Response
Enter BofL (Breath of Life) timer value
(1-60) [5]: Enter the maximum amount of
time that can elapse between the
successful transmission of BofL
messages.
Enter Local Address
selection [3]: 1. DCE
2. DTE
3. EXPLICIT
Note: Reverse local and remote
address values when
configuring the device at the
other end of the circuit.
(Exception: When connecting to
a Series 5 router that uses
DCE/DTE addressing, use the
SAME local address value.)
(continued)
Static Route to Site Manager Worksheet (continued)
Requested Information Options Your Response