Brother FAX-565 - Manual (Page 89)

SETUP SEND 6 - 18
Memory Transmission
This feature allows the fax machine to scan a fax into its memory and
send it as soon as the scan is complete. This way, you don’t have to
wait for the entire fax to be transmitted before you retrieve your
document.
1
Insert the original face down in the ADF.
2
Press Menu/Set , 3 , 9 .
3
To change the default setting, press
or to select ON (or OFF ).
Press Menu/Set .
Go to Step 5.
—OR—
For the next fax transmission only, press or to select
NEXT FAX ONLY .
Press Menu/Set .
4
For the next fax only, press or to select ON (or OFF ).
Press Menu/Set .
5
Press 1 to select additional settings. The display returns to the
SETUP SEND menu.
—OR—
Press 2 if you are finished choosing settings and go to Step 6.
6
Enter fax number and press Fax Start .
If you get a OUT OF MEMORY message while scanning the first
page of a fax, press Stop/Exit to cancel the scan. If you get a
OUT OF MEMORY message while scanning in a subsequent
page, you’ll have the option to press Fax Start to transmit the
pages scanned so far, or to press Stop/Exit to cancel the
operation. In this case, send the fax by the Manual
Transmission.
Depending on your typical faxes, OUT OF MEMORY errors can
occur frequently. If this happens, change the Memory
Transmission setting back to
OFF .
9.MEMORY TX
MEMORY TX:ON
SELECT ↑ ↓ & SET