Brother FAX-565 - Manual (Page 74)

6 - 3 SETUP SEND
How to fax
Automatic transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset or press Hook .
1
Insert the original face down, top edge first in the ADF.
2
Adjust the paper guides to fit the width of your original.
3
Enter the fax number using One-Touch, Speed-Dial, Search or
the dial pad.
(See One-Touch dialing, Speed-dialing and Search, pages 6-1
to 6-2.)
4
Press Fax Start .
The ADF can hold up to 10 pages, feeding each one individually
through the fax machine. Use standard 17 lb-23.4 lb (64 g/m
2
-90 g/m 2 ) paper when using the ADF; if you are using heavier
paper, feed each sheet individually to prevent paper jams.
Press Resolution (before you send the fax) to select the
resolution for the document you are sending. If you wish to send
in
STANDARD resolution, i.e. a general fax with no graphics, then
the default is STANDARD , and the resolution button need not be
pressed. (See Fax resolution on page 6-7.)
Paper Guides