Brother FAX-565 - Manual (Page 78)

6 - 7 SETUP SEND
Fax resolution
When you have an original in the ADF you can use the Resolution
key to change the setting temporarily (for this fax only). Press
Resolution repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting.
1
Press Menu/Set , 3 , 4 .
2
Press or to select the
resolution you want.
Press Menu/Set .
3
Press Stop/Exit .
Manual and automatic fax redial
If you are sending a fax manually and the line is busy, press
Redial/Pause , and then press Fax Start to try again. If you want
to make a second call to the last number dialed, you can save time
by pressing
Redial/Pause and Fax Start .
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the fax
machine will automatically redial one time after five minutes.
STANDARD Suitable for most typed documents.
FINE Good for small print and transmits a little
slower than Standard resolution.
S. FINE Good for small print or artwork and transmits
slower than Fine resolution.
PHOTO Use when the original has varying shades of
gray. This has the slowest transmission
time.
4.RESOLUTION