Brother FAX-565 - Manual (Page 11)

ix
Quick Reference Guide
Sending faxes
Automatic transmission
1
Insert the original face down
in the ADF (up to 10 pages).
2
Enter the fax number you
want to call.
3
Press Fax Start .
Receiving faxes
Select Receive Mode
1
Press Receive Mode to
select FAX ONLY ,
FAX/TEL , TAD:ANSWER
MACH. or MANUAL . If you
select FAX/TEL , make sure
you set Ring Delay and F/T
Ring Time. (See Setting the
Ring Delay on page 5-3 and
Setting the F/T Ring Time
(FAX/TEL mode only) on
page 5-4.)
Storing numbers
Storing One-Touch Dial
numbers
1
Press Menu/Set , 6 , 1 .
2
Press a One-Touch key
where you want to store a
number.
3
Enter a number (up to 20
digits), and then press
Menu/Set .
4
Enter a name (up to 15
characters) or leave it blank,
and then press
Menu/Set .
5
Press or to select the
type of number and press
Menu/Set .
6
Press Stop/Exit .
Storing Speed-Dial numbers
1
Press Menu/Set , 6 , 2 .
2
Enter a two-digit Speed-Dial
number (00-99).
3
Press Menu/Set .
4
Enter a number (up to 20
digits), and then press
Menu/Set .
5
Enter a name (up to 15
characters) or leave it blank,
and then press
Menu/Set .
6
Press or to select the
type of number and press
Menu/Set .
7
Press Stop/Exit .