Brother 1270N User Manual

Page 89

Text mode
Original mode

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

4-19

NOTE:

When re-assembling the fixing unit, align the fixing unit frame at the drive unit side into the
concave part of the main frame.

Fig. 4-33

(7) Remove the M3x10 screw to remove the star wheel holder ASSY from the fixing unit by

lifting the left hand end of the assembly slightly and then moving the assembly to the right
to release the right hand end from the fixing unit frame.

Fig. 4-34

Main frame

Fixing unit

(concavity)

Fixing unit

Main frame

Fixing unit

Star wheel holder ASSY

Screw, bind M3x10