Main cover -13, 7 main cover – Brother 1270N User Manual

Page 83

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

4-13

(5) Turn the top cover upside down and remove the second eject roller ASSY by lifting the

middle of the roller upwards until the roller releases from the cover.

Fig. 4-21

3.7

Main Cover

(1) Remove the two M3x8 Taptite screws from the rear of the main cover.

(2) Release the hooks at the right and left hand top sides of the printer, then, while pulling the

cover outwards to clear the power socket and switch, lift up the main cover to remove it
complete with the rear cover.

Fig. 4-22

Top cover

Second eject roller ASSY

Rear cover

Taptite, bind M3x8

(hook)

Main cover

Step (1)