Toshiba Satellite A100 (PSAAR) - Manual (Page 129)

User’s Manual 9-14
Troubleshooting
Sound system
TV output signal
Refer also to your Personal Conferencing Kit’s documentation.
Display error occurs Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Problem Procedure
Problem Procedure
No sound is heard Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for I/O
address, Interrupt level and DMA are correct for
your software and do not conflict with other
hardware devices that you may have connected to
the computer.
If problems persist, contact your dealer.
Problem Procedure
Display on TV is
poor
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
No display Try adjusting the contrast and brightness controls
on the external monitor.
Press hot keys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard .
NOTE: If you turn the computer off in Resume
mode while the display is on TV, the computer will
select either the internal LCD or an external
computer CRT as the display device.
If problems persist, contact your dealer.