Toshiba Portege 7140 - Manual (Page 98)

7-14 Setup and Password Security User's Manual
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
PCI bus
This item displays the interrupt level for the CardBus and the USB in the
computer. It is for information only and cannot be changed. It appears
only in TSETUP.
PCI BUS = IRQ11
PC Card
This option lets you set the PC Card Controller mode.
Auto-Selected
Use this setting for all PC Cards if you are using
a plug-and-play operating system. (Default)
CardBus/16bit
If the card does not work properly with the Auto-
Selected setting, use this setting for CardBus PC
cards.
PCIC Compatible
If the card does not work properly with the Auto-
Selected and CardBus/16bit settings, use this
setting for 16-bit PC Cards.
When Device Config is set to Setup by OS, you must set the PC Card to
Auto-Selected.
Drives I/O
This item displays the installed hard disk drive and/or an optional DVD
Dock. It appears only in TSETUP.
Settings for Hard Disk Drive
HDD
= Primary IDE (1F0H/IRQ14)
(HDD ready for use)
Settings for DVD-ROM drive
Displayed only when an optional DVD Dock II is connected.
Dock
= Secondary IDE (170H/IRQ15)
(CD/DVD-ROM ready for use)
Floppy disk I/O
This item displays the address, interrupt level and channel settings for the
diskette drive. It appears only in TSETUP.
Floppy Disk = (3F2H/IRQ6/CH2)