Executing tsetup -2, Executing tsetup, The system setup screen – Toshiba Portege 7140 User Manual
Page 86
7-2 Setup and Password Security
User's Manual
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
Executing TSETUP
1.
Select Restart (the computer) in MS-DOS mode? from the Shut
Down window.
2.
After the computer reboots in MS-DOS, type TSETUP and press
Enter
. TSETUP displays the SYSTEM SETUP screen.
The TSETUP screen is divided into two pages SYSTEM SETUP (1/2) and
SYSTEM SETUP (2/2).
MEMORY
Total
= 65536 KB
BATTERY
Battery Save Mode
= Full Power
PASSWORD
Not Registered
DISPLAY
Power On Display
= Auto-Selected
LCD Display Stretch = Disabled
TV Config.
BOOT PRIORITY
Boot Priority = FDD®HDD®CD-ROM®LAN
Power On Boot Select = Enabled
OTHERS
Power-up Mode
= Boot
CPU Cache
= Enabled
Level 2 Cache
= Enabled
Processor Serial Number
= Disabled
Auto Power On
= Disabled
Alarm Volume
= High
System Beep
= Enabled
PERIPHERAL
Pointing Devices
= Auto-Selected
Ext Keyboard "Fn"
= Disabled
USB Legacy Emulation = Disabled
Parallel Port Mode
= ECP
Hard Disk Mode = Enhanced IDE (Normal)
SYSTEM SETUP (1/2)
ACPI BIOS version = x.xx
CONFIGURATION
Device Config.
= All Devices
I/O PORTS
Serial
= COM1(3F8H/IRQ4)
Built-in Modem
= COM2(2F8H/IRQ3)
Parallel
= LPT1(378H/IRQ7/CH3)
FLOPPY DISK I/O
Floppy Disk
= (3F2H/IRQ6/CH2)
DRIVES I/O
HDD
= Primary IDE(1F0H/IRQ14)
Dock
= Secondary IDE(170H/IRQ15)
PCI BUS
PCI BUS
= IRQ11
SYSTEM SETUP (2/2)
ACPI BIOS version = x.xx
PC CARD
Controller Mode
= Auto-Selected
The system setup screen
↑↓←→ :
↑↓←→ :
↑↓←→ :
↑↓←→ : Select items Space, BkSp : Change values
PgDn, PgUp : Change
pages
Esc : Exit without saving Home : Set default values End : Save changes
and Exit
The TV Config. and Dock items appears only when an optional
DVD Dock II is connected in the computer.
The Panel Power On/Off item appears only when the computer is in
Resume mode.