Toshiba Portege 7140 - Manual (Page 101)

User's Manual Setup and Password Security 7-17
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
b. If the character strings do not match, the following message appears:
Password verify error!
Do you want to retry ?
Press Y to return to step 3. Press N to return to the DOS prompt.
7. Continue with the procedures in the section Enabling TSETUP in
this chapter.
User password
To enter a user password, execute TSETUP, then:
1. Go to the Password item and press the Space or BkSp key to
display the following prompt:
Password =
2. Enter a password of up to 10 characters. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
Password = ****
If you press Enter before entering the password, Not registered will
appear on the display.
3. Press Enter. The following message appears, allowing you to verify
the password.
Verify Password =
4. If character strings match, the password is registered and the display
changes to:
Registered
If they do not match, the following message appears along with a beep
indicating you must repeat from step 2.
Entry Error!!