beautypg.com

Starting the computer by password, Installing the battery pack -10, Starting the computer by password -10 – Toshiba Portege 7140 User Manual

Page 78: Installing the battery pack

background image

6-10 Power and Power-Up Modes

User's Manual

Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK

Installing the battery pack

To install a battery pack, follow the steps below.

1.

Be sure the computer’s power is off and all cables are disconnected.

2.

Insert the battery.

3.

Push the battery firmly into the connection until the latch clicks to the

lock position.

4.

Push the battery lock to its locked position to secure the battery pack.

Installing the battery pack

Starting the computer by password

If you registered a password as supervisor or user, you must enter it to

start the computer. If you forget your password, use the password service

diskette. For more information about how to set a password and make a

password service diskette, refer to the Password security section in

Chapter 7,

Setup and Password Security

.

To start up the computer with the password, follow these steps:

1.

Turn on the computer as described in Chapter 3,

Getting Started

, and

the following message appears:

Password =

At this point, the hotkeys Fn + F1 to F5 do not work. They will function

after you enter the password. Hotkeys Fn + Esc (Windows 98 only) also

do not work.

2.

Enter the password.

This manual is related to the following products: