Toshiba Portege 7140 - Manual (Page 111)

User's Manual Optional Devices 8-5
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
5. Slide your fingernail or a thin object under the cover and lift it off.
Removing the memory module socket cover
6. Insert the module’s connectors into the computer’s connectors at
about a 45 degree angle and press the module carefully to ensure a
firm connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Push the raised edge of the module down so it lies flat. Two latches on
either side will clamp against notches on the side of the module to
secure it.
Seating the memory module
8. Seat the cover and secure it with the screw.
9. Replace the battery pack as described in Chapter 6, Power and
Power-Up Modes .
10. Turn the power on and make sure the added memory is recognised.
11. Clear Hibernation files. Refer to the section Clearing Hibernation files.