Toshiba Portege 7140 - Manual (Page 93)

User's Manual Setup and Password Security 7-9
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
Power on Boot Select
The options are Enabled and Disabled.
Enabled
Enables the Power on boot mode. (Default)
Disabled
Disables the Power on boot mode.
Display
This group of options lets you configure the computer’s display.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Simultaneous
selects both the internal LCD and external
monitor for simultaneous display.
When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after
starting in Resume mode, press Fn + F5.
You cannot select TV display in Hardware Setup or TSETUP. To display
on a TV screen use hot keys Fn + F5. Refer to Chapter 5, The Keyboard .
(Only when an optional DVD Dock II is connected in the computer.)
LCD Display Stretch
The options are Enabled and Disabled.
Enabled
Enabling this feature increases the display area
of the screen.
Disabled
Disabling this feature. (Default)
TV Config.
This option allows you to select the type of TV.
Type NTSC
(National Television System Committee)
PAL
(Phase alternation line)
It appears only when an optional DVD Dock II is connected in the computer.