Test sequence -18 subtests -18, Test sequence, Subtests – Toshiba Portege 7140 User Manual
Page 136
9-18 Troubleshooting
User's Manual
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
Test sequence
The diagnostic test checks the computer and attached peripherals in the
following sequence:
1.
System test
2.
Memory test
3.
Display tests
4.
Floppy Disk (Diskette) test
5.
Hard disk test
6.
Printer test
When a test is in progress, the program displays:
IN PROGRESS TSSDSS
where T indicates the test number, the first SS indicates the subtest
number, D indicates the drive (if tested), and the second SS indicates the
hardware status.
Subtests
The following gives details on each subtest:
System/memory
The System and Memory tests run together for about one minute. The
System test displays no messages. The Memory test displays the
following message:
MEMORY TEST IN PROGRESS XXXXXX
where xxxxxx is the current memory location being tested. The memory
test includes conventional and extended memory.
If either test aborts:
1.
Write down everything that appears on screen.
2.
Press Ctrl + Pause (Break) or Ctrl + C to return to the diagnostics
menu.
3.
Consult your dealer.