beautypg.com

Accupoint ii precautions -2 replacing the cap -2, Accupoint ii precautions, Replacing the cap – Toshiba Portege 7140 User Manual

Page 56

background image

4-2 Operating Basics

User's Manual

Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK

AccuPoint II precautions

Certain conditions can affect the on-screen pointer when using

AccuPoint II. For example, the pointer may travel contrary to AccuPoint II

operation or an error message may appear, if

„

You touch the AccuPoint II during power-up.

„

You apply constant, soft pressure during power-up.

„

There is a sudden temperature change.

„

Strong stress is applied to the AccuPoint II.

If an error message appears, reboot the computer. If an error message does

not appear, wait a moment for the pointer to stop, then continue operation.

Replacing the cap

The AccuPoint II cap is an expendable item that should be replaced after

prolonged use. There are spare AccuPoint II caps supplied with the computer.

1.

To remove the AccuPoint II cap, firmly grasp the cap and pull it straight

up.

ACCUPOINT II CAP

PEG

Removing the AccuPoint II cap

2.

Position a new cap on the peg and press it into place.

The peg is square, so be careful to align the cap’s square hole with the peg.

This manual is related to the following products: