Toshiba Portege 7140 User Manual
Page 65
User's Manual
The Keyboard 5-5
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
Fn
+
F3
Power up mode:
Pressing Fn + F3 changes the power up mode. When
you press these hotkeys, the current setting will be displayed in a window.
If you use Windows 95, you can use the System window of Power Mode
Setup in Power Saver. In a Windows 98 environment, use the When I
press the power button feature of System Power Mode window in Power
Saver. In Windows 98, this function changes the power up mode only
when you start the computer by pressing the power button.
F4
Fn
+
Alarm volume:
Press Fn + F4 to adjust the alarm volume to off, low,
medium or high. The first time you press Fn + F4 the volume is set to off.
Continue holding down Fn and press F4 again to change the setting. A
beep sounds to let you know the current alarm volume. The volume at
power on depends on the latest setting. See Chapter 7,
Fn
F5
+
Display selection:
Pressing Fn + F5 changes the active display device.
As indicated below, the changes depend on the computer’s display type,
current setting and whether you have a DVD Network Dock II or
CD Network Dock connected.
No DVD Dock
LCD only Ö LCD/CRT Ö CRT only Ö (back to LCD only)
DVD Dock connected
LCD only Ö LCD/CRT Ö CRT only Ö LCD/TV Ö TV only Ö (back to LCD only)
The LCD/TV setting can be selected only when the computer is in
Different Refresh Rate mode. Use the display setting feature in Windows
to set the mode.