Toshiba Portege 7140 - Manual (Page 91)

User's Manual Setup and Password Security 7-7
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
USB Legacy Emulation
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse and
keyboard by setting the USB Legacy Emulation item to Enabled.
Enabled
Enables the USB Legacy Emulation.
Disabled
Disables the USB Legacy Emulation. (Default)
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
Standard
Bi-directional
This setting should be used with some other
parallel devices.
Hard Disk Mode
Use this item to select the hard disk mode. The hard disk mode can be
set only in TSETUP.
Formats for Enhanced IDE and Standard IDE are different, so if you
change the setting, you will have to reformat the hard disk for the
appropriate setting.
Enhanced IDE
(Normal)
Select this mode when using MS-DOS, Windows
for Workgroups, Windows 95/98 or OS/2™.
(Default)
Standard IDE
Select this mode when using Novell® NetWare®
or UNIX®. If this mode is selected with MS-DOS,
up to 504 MB is logically available even though
the disk’s capacity is larger than 504 MB.