Making a password service diskette -21, Making a password service diskette – Toshiba Portege 7140 User Manual
Page 105
User's Manual
Setup and Password Security 7-21
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
2.
The following menu appears:
1. Able to run SETUP
2. Unable to run SETUP
3. Unable to show Processor Serial Number item.
Select number <1/2/3>?
•
If you select 1, TSETUP access is enabled (and other restrictions
disabled). The following is displayed:
USER PASSWORD MODE = Able to run SETUP.
•
If you select 2, TSETUP access is disabled (and other restrictions
disabled). The following is displayed:
USER PASSWORD MODE = Unable to run SETUP.
•
If you select 3, TSETUP access is enabled (and other restrictions
disabled), but the Processor Serial Number is not shown. The
following is displayed:
USER PASSWORD MODE = Unable to show
Processor Serial Number.
Making a password service diskette
If you forget the password, the password service diskette lets you bypass
the password function. To make a password service diskette, you will need
one 3 ½” 2DD or 2HD diskette that contains no data you want to keep.
You cannot make a password service diskette for the supervisor password.
Follow these steps:
1.
Set the password as described in the previous section.
2.
Insert a diskette in the 3 ½" diskette drive.
3.
Press End.
If the changed item does not require the system to reboot, the
following message is displayed:
Are you sure? (Y/N)
Insert password service disk if necessary.
If the changed item requires the system to reboot, the following
message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system
to reboot.
Insert password service disk if necessary.