Pioneer AVIC-X1BT - Manual (Page 88)

86
Chapter
7
Using the
AV Source (Pionee
r
AV E
q
uipment)
AV
Advanced hands-free phoning
operation
(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Page 62
❒ When your mobile phone is not connected,
you cannot select “PHONEBOOK TRANS-
FER” or “CLEAR MEMORY”.
❒ You can only select “ECHO CANCEL” while
transmitting or receiving a call, or during con-
versation.
Connecting a mobile phone
To use a phone wirelessly with the navigation sys-
tem, it is necessary first to establish a connection
using Bluetooth wireless technology. There are
several ways you can do this.
❒ HFP (Hands Free Profile) is prioritized over
HSP (Head Set Profile) in the connection via
Bluetooth wireless technology. If connection
cannot be established by HFP, HSP connec-
tion takes place.
❒ A phone may be connected via Bluetooth
wireless technology but not yet registered
with the navigation system. In this case it is
said to be temporarily connected, and the
available features are limited. To take full
advantage of all the features available, we rec-
ommend you register your phone with this
navigation system.
The limited features are;
• Preset dial list
• Call history list
• Phone book
➲ Registering connected mobile phone ➞
Page 87
❒ If “AUTO CONNECT” is set to “ON”, mobile
phone that has already been registered is con-
nected automatically.
➲ Setting the automatic connection ➞ Page 91
Using a mobile phone to initiate a con-
nection
Putting the navigation system in Connection
open mode allows you to establish a Bluetooth
wireless connection from your mobile phone.
1
Touch “PHONE CONNECT” in the
FUNCTION menu.
The phone connection menu screen appears.
2
Touch “CONNECTION OPEN”.
“WAITING” is flash in the display.
3
Use a mobile phone to connect to the nav-
igation system.
Connection to the mobile phone starts. When
the connection is established, the device
name of the connected mobile phone is dis-
played.
❒ Operation varies depending on the type of
your mobile phone. Refer to the instruction
manual that came with your mobile phone
for detailed instructions.
❒ To complete the connection, please check
the device name (Pioneer BT Unit) and
enter the PIN code (0000) on your mobile
phone.
➲ “Editing the PIN code” ➞ Page 108
Searching for available mobile phones
You can have the navigation system search for
any available phones in the area that have Blue-
tooth wireless technology, then select which you
want to connect to from a list displayed onscreen.
1
Touch “PHONE CONNECT” in the
FUNCTION menu.
The phone connection menu screen appears.
(1)
TE
L