Pioneer AVIC-X1BT - Manual (Page 136)

134
Ap
pe
nd
ix
NAVI
/A
V
Problems in the audio screen (common)
Problems in the audio screen (during DVD-Video playback)
Symptom Cause Action (See)
Playback is not possible. The disc is dirty. Clean disc. (➞ “Hardware Manual”)
The loaded disc is a type this unit
cannot play.
Check what type the disc is.
Non compatible video system disc is
loaded.
Change to a disc compatible to your
video system.
There’s no picture. The handbrake cord is not con-
nected.
Connect the handbrake cord, and
apply the handbrake.
The handbrake is not applied. Connect the handbrake cord, and
apply the handbrake.
There’s audio and video skipping. This unit is not firmly secured. Secure this unit firmly.
Rear display picture disappears. The source disc being listened to
with the navigation system has been
ejected.
Before ejecting the disc, switch the
source. This problem may occur
when certain connection methods
are used.
The REAR/GUIDE button was
pressed and REAR ON mode
switched off.
Press the REAR/GUIDE button to
turn REAR ON mode on.
There was a problem with the rear
display or a faulty wiring connection,
for example.
Check the rear display and its con-
nection.
Rear View is selected on the screen. Select view mode other than Rear
View.
When the gearstick is in [R], rear
view camera images are displayed.
(When “NAVI” is selected in REAR
DISP menu.)
Move the gearstick to a position
other than [R]. (Select SOURCE in
REAR DISP menu.)
Nothing is displayed and the touch
panel keys cannot be used.
The setting for the rear view camera
is incorrect.
The gearstick was placed in [R] when
the rear view camera was not con-
nected.
Connect a rear view camera cor-
rectly.
Press the NAVI/AV button to return
to the source display and then select
the correct setting for CAMERA.
➲ About CAMERA setting ➞
Page 109
Symptom Cause Action (See)
No sounds are heard.
The volume level will not rise.
Cables are not connected correctly. Connect the cables correctly.
The unit is performing still, slow
motion or frame-by-frame playback.
There is no sound during still, slow
motion or frame-by-frame playback.
“dts” is selected for the DVD-Video
disc sound track.
Switch to a non “dts” sound track.
The icon is displayed, and opera-
tion is not possible.
The operation is prohibited for the
disc.
This operation is not possible.
The operation is not compatible with
the disc’s configuration.
This operation is not possible.
The picture stops (pauses) and the
unit cannot be operated.
Reading of data has become impos-
sible during playback.
After touching  once, start play-
back once more.
The picture is stretched, the aspect is
incorrect.
The aspect setting is incorrect for the
display.
Select the appropriate setting for
your display. (➞ “Hardware Manual”)
Playback is not possible. The loaded disc has a different
region number from the navigation
system.
Replace the disc with one featuring
the same region number as the navi-
gation system. (➞ “Hardware Man-
ual”)
A parental lock message is displayed
and playback is not possible.
Parental lock is on. Turn parental lock off or change the
level. (➞ Page 106)