Pioneer AVIC-X1BT - Manual (Page 125)

123
A
ppe
ndi
x
NA
VI/
A
V
Memory Navi Mode
While the DVD Map Disc is inserted, you can
store the data on the DVD Map Disc into the
memory of the navigation system. If the DVD Map
Disc is removed from the navigation system after
the data is stored, navigation is performed using
the data in the memory (memory navi mode). In
the memory navi mode, you can play a music CD
or DVD-Video on the navigation system while nav-
igation is taking place.
The operation is automatically switched to the
memory navi mode when the DVD Map Disc is
removed from the navigation system.
Navigation in the memory navi
mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared with navigation using the DVD Map Disc
(DVD navi mode). These function buttons, which
cannot be used in the memory navi mode, are
indicated in light grey. If you want to use these
functions, please insert the DVD Map Disc again.
In addition, you may need to insert the DVD Map
Disc and store new data in the memory in during
navigation operation, such as when the destina-
tion is far away.
The memory navi mode uses the following map
data to perform navigation.
The following are collectively known as Memory
Data:
• Manually downloaded memory area data in the
“Map In Memory” of the Settings menu (Man-
ual downloaded Memory Area)
• Automatically downloaded memory data of the
surrounding areas during the route search
(Auto downloaded Memory Area)
➲ Setting of the memory area ➞ Page 58
What is manual downloaded memory
area?
Memory area is the area of the map data, which
the user voluntarily read into the memory for the
memory navi mode. Normal guidance is available
if the memory area is registered and you drive
within the stored area.
What is auto downloaded memory
area?
This is the zone around the route in the map area
that is automatically stored in the memory when
the route is set. When the route distance is 120
km (74.5 mi) or shorter, a zone with a width of
approximately 17.5 km (10.9 mi) around the route
is stored. When the route distance is longer than
120 km, a zone with a width of approximately 10.6
km (6.6 mi) around the route is recorded. These
data are transmitted to the memory as you set the
route. When a new route is entered, the memo-
rised data are deleted.
The data read into the memory will not be deleted
even when the vehicle’s engine is turned off.
The memorised area may be deleted in the follow-
ing circumstances:
• Yellow lead of the navigation system or the
vehicle battery is disconnected.
• The RESET button is pressed.
• Software is updated.
❒ In these circumstances, the system will auto-
matically try to recover the deleted informa-
tion, but data can be recovered only for areas
stored on the disc. For items that could not be
recovered, a recovery process will begin when
you set another disc.
Navigation operation during the mem-
ory navi mode
• ✓ :Operation possible
• U :Operation restricted
• – :Operation not possible
Main menu
Destination menu
Address Search –
Return Home –
Go to –
POI Search –
Vicinity Search –
Address Book –
Destination History –
Motorway Search –
Postal Code Search –
Cancel Route ✓
Traffic/Info menu
All Traffic –
Traffic On Route –
Overlay POI –
Traffic Settings ✓