Storing and recalling broadcast stations 71, Advanced radio operation, Storing and recalling broadcast stations – Pioneer AVIC-X1BT User Manual
Page 73
71
Chapter
6
Using
the AV Source
(Built
-in DVD
Driv
e and
Rad
io)
AV
(6) LOCAL indicator
Shows when local seek tuning is on.
(7) STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
1
Touch the source icon and then touch
“RADIO” to select the radio.
2
Touch “BAND” to select a band.
Touch “BAND” repeatedly until the desired
band is displayed, FM1, FM2, FM3 for FM or
MW/LW.
3
To perform manual tuning, touch or
briefly.
The frequencies move up or down step by
step.
You can also perform manual tuning by mov-
ing the joystick left or right.
4
To perform seek tuning, keep touching
or for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception
is found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching or you can skip
broadcasting stations. Seek tuning starts as
soon as you release the keys.
You can also perform seek tuning by holding
the joystick left or right.
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily store
up to six broadcast stations for later recall with
the touch of a key.
1
When you find a frequency that you want
to store in memory keep touching a preset
tuning key P1 — P6 until the preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station has been stored in
memory.
2
The next time you touch the same preset
tuning key P1 — P6 the radio station is
recalled from memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
When P1 — P6 are not displayed, you can dis-
play them by touching DISP.
❒ Up to 18 FM stations, 6 for each of the
three FM bands, and 6 MW/LW stations
can be stored in memory.
❒ You can also use and to recall radio
stations assigned to preset tuning keys P1
— P6.
Advanced radio operation
(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Preset tuning keys (P1 — P6)
(1)
RA
DIO