Pioneer AVIC-X1BT - Manual (Page 110)

108
Chapter
8
Customi
sing
the Audio Source Setting
AV
phase) built-in PREOUT SUB W or the auxiliary
PREOUT FULL.
1
Touch “REAR SP” in the INITIAL menu.
2
Touch “REAR SP” to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select FULL.
When a subwoofer is connected to the rear
output, select SUB W.
❒ When the rear output setting is SUB W,
you cannot change the subwoofer control-
ler.
3
Touch “PREOUT” to switch the sub-
woofer output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn “NON FADING” or
“SUB WOOFER” in the AUDIO menu
“ON”.
➲ Using non fading output ➞ Page 104
➲ Using subwoofer output ➞ Page 103
❒ If you change the subwoofer controller
(REAR SP), the subwoofer output (SUB
WOOFER) and non fading output (NON
FADING) in the AUDIO menu return to
the factory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Editing the PIN code
You can edit the PIN code you like. Use this func-
tion when you need to change the PIN code from
the default setting.
1
Touch “PIN EDIT” in the INITIAL menu.
2
Touch number key to enter the new PIN
code.
3
Touch “ENTER” to fix the new PIN code.
❒ The default setting of the PIN code is 0000.
❒ When a mobile phone finds the device
which can be connected by the Bluetooth
technology, “Pioneer BT unit” will appear
in the mobile phone’s display.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a mobile
phone connected to navigation system.
• When the voice guidance is output.
1
Touch “TEL/GUIDE” in the INITIAL
menu.
Each touch of the “TEL/GUIDE” changes the
settings as follows:
• MUTE — Muting
• ATT — Attenuation
• NORMAL — Volume does not change
❒ The sound is turned off, “MUTE” is displayed
and no audio adjustments are possible.
❒ The sound is attenuated, “ATT” is dis-
played and no audio adjustments, except
volume control, are possible.
❒ Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the
navigation guidance is ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use the VOLUME/ATT
button to control the navigation voice guid-
ance volume.
Switching the automatic disc
playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading slot.
When this function is on, the disc will be auto-
matically played after it is inserted into the disc
loading slot.
Initially, this function is set to OFF.
1
Touch “DISC AUTO” in the INITIAL menu.
Touching “DISC AUTO” switches between
“ON” and “OFF”.
Version of the Bluetooth module
System (microprocessor) version
PIN code
Bluetooth Device (BD) address
Initial Sett
ings