Pioneer AVIC-X1BT - Manual (Page 139)

137
A
ppe
ndi
x
NA
VI/
A
V
There is no route to the destination. The destination or way point(s) are in
an isolated island, etc. without a ferry
and the route calculation is impossi-
ble.
Change the destination.
Your journey can not avoid the speci-
fied area.
If route setting cannot avoid speci-
fied Areas to Avoid.
If the current route is not desired, set
destination or way points that do not
pass through the Areas to Avoid.
The route could not avoid the speci-
fied area.
Toll road has not been avoided.
If the route to the destination (or way
point) cannot be established by
bypassing toll roads (including toll
areas) and Areas to Avoid.
If the current route is not desired, set
destination or way points that do not
pass through toll roads (including
toll areas) and Areas to Avoid.
Ferry has not been avoided. In case a ferry route was included in
the route to the destination or way
points even though “Avoid Ferry”
was set to On.
If the current route is not desired, set
destination or way points that do not
pass through a ferry route.
Toll road has not been avoided. If the route to the destination (or way
point) cannot be established by
bypassing toll roads (including toll
areas)
If the current route is not desired, set
destination or way points that do not
pass through toll roads (including
toll areas)
There is no applicable data for the
selected city. Automatically returning
to list.
If the history data of the City could
not be used (for example, in case that
the history data of the City that was
used in the POI Search cannot be
found in the Address Search.)
Once the search is performed to
specify the City, the result is saved as
a history. The data of the specified
City, however, may not be hit by the
different search criteria. In this case,
try another search method or change
the destination.
There is no Motorway in this area. If no motorway was found in the
selected country.
Set the destination or way points
using another search method or
change the location of the destina-
tion or way points.
This area does not contain any POI’s
of the selected type.
Facilities of the selected category do
not exist in the surrounding areas.
Use another search method or move
to another location and perform the
POI Search again.
Failed to make the route profile. Failed to generate the route profile
because the set route passes
through areas not stored on the DVD
Map Disc (unrecorded areas).
Insert the DVD Map Disc and retry.
The maximum number of registra-
tions has been completed. Please
clear existing registered items and
re-register current item.
If there are already 300 items when
you attempt to register an item in the
Address Book.
Delete unnecessary data and try to
register again.
Memory is full. When the total 300 registered points
are in the CD-R and Address Book,
you attempt moving an item to the
Address Book from CD-R.
Delete unnecessary data on the sys-
tem and try to register again or
reduce currently selected items.
Too many records are selected.
Please indicate the records you
would like to remove from the mem-
ory.
When the total 98 registered points
for using voice recognition are in the
CD-R and Address Book, you
attempt moving an item to the
Address Book from CD-R.
Delete some resistered items as nec-
essary or reduce currently selected
items.
Too many records are selected.
Please indicate the records you
would like to remove from the mem-
ory.
If the number of registered records of
the voice recognition reaches or
exceeds 98.
Delete some registered items as nec-
essary.
You can select up to 98 records with
voice recognition.
If the number of registered records of
the voice recognition reaches or
exceeds 98.
Reduce currently selected items.
Irregular character strings. Please
input again.
A symbol that cannot be pronounced
was entered.
Enter a word that can be pro-
nounced.
Message When What to do