Pioneer AVIC-X1BT - Manual (Page 137)

135
A
ppe
ndi
x
NA
VI/
A
V
Messages and how to react to them
The following messages may be displayed by your navigation system.
❒ There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Parental lock cannot be cancelled. The code number is incorrect. Input the correct code number. (➞
Page 106)
You have forgotten your code
number.
Touch “CLEAR” 10 times to cancel
the code number. (➞ Page 106)
Dialogue language (and subtitle lan-
guage) cannot be switched.
The DVD playing does not feature
multiple language recordings.
You cannot switch among multiple
languages if they aren’t recorded on
the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
No subtitles are displayed. The DVD playing does not feature
subtitles.
Subtitles are not displayed if they are
not recorded on the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
Playback is not with the audio lan-
guage and subtitle language settings
selected in DVD SETUP.
The DVD playing does not feature
dialogue or subtitles in the language
selected in DVD SETUP.
Switching to a selected language is
not possible if the language selected
in DVD SETUP is not recorded on the
disc.
Switching the viewing angle is not
possible.
The DVD playing does not feature
scenes shot from multiple angles.
You cannot switch between multiple
angles if the DVD does not feature
scenes recorded from multiple
angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
Switch between multiple angles
when watching scenes recorded
from multiple angles.
The picture is extremely unclear/dis-
torted and dark during playback.
The disc features a signal to prohibit
copying. (Some discs may have this.)
Since the navigation system is com-
patible with the copy guard analog
copy protect system, when playing a
disc that has a signal prohibiting
copying, the picture may suffer from
horizontal stripes or other imperfec-
tions when viewed on some displays.
This does not mean this unit is mal-
functioning.
Message When What to do
Please insert the appropriate disc.
This is not the appropriate disc.
Please insert the appropriate disc.
If you try to use a disc which is
incompatible with this system.
Insert a suitable disc.
If you insert a disc upside down. Insert the disc with the label upward.
If the disc is dirty. Clean the disc.
If the disc is cracked or otherwise
damaged.
Insert a normal, round disc.
Irregular speed pulse signal is
detected. Please turn system power
off and check the installation. After
checking, please re-boot the system
and press “OK”.
If the Navigation unit does not
receive the vehicle speed pulse.
Consult your Pioneer dealer.
Symptom Cause Action (See)