AEG Voxtel smart3 - Manual (Page 38)

Using the Phone Functions
22
10 Using the Phone Functions
10.1 Call another handset registered to the same base
station (Intercom)
1 From the home screen, press
C
.
2 Tap Intercom tab.
3 Tap to select a Handset Number (0 to 5) to call.
4 Press
D
to end the call.
10.2 Make an external call
Placing an external call using the Voxtel Smart 3 is similar to dialling with a mobile phone.
1 From the home screen, press
C
.
2 Tap Phone tab to access the dial pad.
3 Enter the phone number.
4 Tap to dial the number.
Note
Tap “Use by default for this action” if you wish to set the selected option as the default
call mode.
5 Press
D
to end the call.
Tip
If you enter a wrong number, tap
to delete the number one by one. Tap and hold to
erase the entire number.
10.2.1 In-call options
During a call, press
H
to access the following options:
Show dialpad Displays the dialpad
End call End the current call
Mute Mute the handset microphone
Speaker Switch to speaker mode
Swap call Swap between 2 calls
Merge call Merge 2 calls to hold a conference call
Add call Put the current call on hold and call another handset
Hold Put the current call on hold
Flash Make a recall (for PBX and some network functions)
I I