AEG Voxtel smart3 - Manual (Page 19)

GETTING STARTED
3
5.6 Connecting the power cable and telephone line
cord
1 Plug one end of the power cable and telephone line cord to the power jack and phone
jack respectively on the bottom of the base station.
2 Plug the other end into a power and telephone wall socket.
5.6.1 If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line, otherwise you may get
interference between the telephone and the broadband, which could cause problems. In a
home with broadband, every telephone must have a micro-filter connected, not just the
one at the telephone point that your modem is connected to. If you need more broadband
micro-filters, contact your broadband supplier.
5.7 Removing back cover
1 Use a small screwdriver or a pen/pencil tip to gently press the small button to release
the spring lock. The bottom edge of the back cover will disengage from the handset..
2 Remove the back cover completely.