AEG Voxtel smart3 - Manual (Page 36)

DECT Settings
20
6 Tap on Enter Pin box to launch the onscreen keyboard.
7 Enter the PIN code of the base station and tap Register.
- If successful, “Success” is displayed.
Note
If the PIN of the base station is set as "0000" (default), the Voxtel Smart 3 will register to
the base station without prompting for the PIN.
8.2 Base Settings
Base settings allows you to view and modify the settings on Voxtel Smart 3 base.
8.2.1 Reset Base Settings to Default
1 On your Voxtel Smart 3, press
H
.
2 Tap Settings > Dect Settings > Base Settings.
3 Tap Reset to Default.
4 Tap Reset to confirm.
8.2.2 Set Flash Duration
The Recall (Flash) time is set to Short (100ms) for the UK, but can be changed if you
connect your phone to a system that requires a different break period, with Medium
(300ms) or Long (600ms), are also available.
1 On your Voxtel Smart 3, press
H
.
2 Tap Settings > Dect Settings > Base Settings.
3 Tap Flash Duration.
4 Tap to select Short, Medium or Long.