AEG Voxtel smart3 - Manual (Page 24)

GETTING STARTED
8
5.18 Screen Rotation
The Voxtel Smart 3 has a tilt/orientation sensor, which detects if you are holding it in
Portrait or Landscape mode. The screen will be adjusted accordingly.
Tip
Automatic screen rotation is enabled by default.
To disable automatic screen rotation, press
H
and then tap Settings > Display > Auto-
rotate screen.
- Automatic screen rotation is disabled when the
✓
disappears.
To enable automatic screen rotation, press
H
and then tap Settings > Display > Auto-
rotate screen again.
- Automatic screen rotation is enabled when the
✓
is shown.
5.19 Recalibrate the touch screen
The Voxtel Smart 3 uses a built-in G-Sensor that changes the screen orientation based on
the way you hold the phone. If you feel that the screen orientation does not respond
properly to the way you hold the phone, you can recalibrate the screen as follows:
Press
H
and then tap Settings > Display > G-Sensor Calibration, and follow the
onscreen instructions.
5.20 Set Date and Time
Note
If you remove the battery of your Voxtel Smart 3, you may need to set the date and time
again.
5.20.1 Set Date
1 Press
H
and tap Settings > Date & time.
2 Tap Set date and then tap + or - on each date field to change the Month, Day and Year.
3 Tap Set to confirm the date setting.