beautypg.com

Konica Minolta bizhub C451 User Manual

Page 94

background image

Scanning

2

C451

2-55

3

Enter the information for the destination, and then touch [OK].

To check the contents of the shared folders, and then touch [Ref-
erence].

To specify an additional address, touch [Next Destination], and
then enter the information.

The entered addresses appear under “Broadcast Destinations”.

4

Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.

For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-75.

5

Load the document into the ADF or place it on the original glass.

6

If desired, press the [Proof Copy] key to check a preview image.

For details, refer to “Sending after previewing” on page 2-20.

7

Press the [Start] key in the control panel.

Scanning of the document begins, and the data is sent.

2

Note

Do not turn off the machine until the scan job is deleted from the Job List
screen.