Ike settings (ipsec settings), Ike settings (ipsec settings) -32 – Konica Minolta bizhub C451 User Manual
Page 277
Network Settings
4
C451
4-32
IKE Settings (IPsec Settings)
Specify the settings for the IKE protocol used during IPsec communication.
Settings can be specified for the following.
!
Detail
Different combinations of the encryption algorithm and authentication al-
gorithm settings for IPsec communication can be saved in four groups.
0 In order to apply the IPsec settings, settings must be specified for “IKE
Settings”, “IPsec SA Settings” and “Peer”.
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
2
To specify settings, touch [ON], and then touch [IKE Settings].
IKE Settings screen 1/2 appears.
Parameter
Description
Encryption Algorithm
Select the encryption algorithm to be used when creating control
tunnels.
Authentication Algorithm
Select the authentication algorithm to be used when creating con-
trol tunnels.
Key Validity Period
Specify the length of time that the key is valid after being generated
when creating control tunnels.
Diffie-Hellman Group
Select the Diffie-Hellman group.