Konica Minolta bizhub C451 - Manual (Page 257)

Network Settings 4
C451 4-12
Using Novell NDS
Before performing the operation, make sure that the following information is
available. The settings can be specified with Novell NDS Netware Server ver-
sion 4.0 or later.
-
Administrator password (required)
- Default NDS tree name (required)
- Default NDS context name (required)
- List of users for authentication (required)
!
Detail
Do not use “”” or “+” in the external server password. For details on the
operating conditions of the external server, contact the network adminis-
trator.
If “Password Rules” is set to “Enable”, only a password with 8 digits can
be specified. For details on the password rules, refer to the User’s Guide
[Copy Operations].
NDS can be used only when IPX is used as the protocol. NDS cannot be
used when IP is used.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [Administrator Settings], then [User Authentication/Account
Track], then [External Server Settings], and then specify settings for the
following.
– Register an external server.
– Specify the server name.
– Select “NDS” as the server type.