Konica Minolta bizhub C451 - Manual (Page 190)

Specifying Utility mode parameters 3
C451 3-24
7
Touch [Host Address], and then type in the IP address or host name.
– To enter a host name, touch [Host Name Input], and then type in the
host name, using the keyboard that appears. To enter an IP ad-
dress, touch [IPv4 Address Input] or [IPv6 Address Input], and then
type in the address, using the keypad or the number buttons that
appear. Touch [
←] or [→] to move the cursor to the desired posi-
tion, and then type in the numbers.
– When the input format is switched to entering an IP address after
the host name was entered, the host name is cleared.
– If [Host Name Input] is touched after the IP address was entered,
the entered IP address is saved and the input screen appears.
– When [Host Name Input] is touched, check that the DNS setting is
correctly specified. For details on the DNS settings, refer to “TCP/
IP Settings” on page 4-17.
8
Touch [OK].
9
Touch [File Path], and then type in the file path, using the keyboard that
appears.
10
Touch [OK].
11
Touch [ ↑] or [↓].
New screen 2/3 appears.
12
Touch [User ID], and then type in the user ID, using the keyboard that
appears.
– To cancel registration of the user ID, touch [ON] beside “anony-
mous”.
13
Touch [OK].