Konica Minolta bizhub C451 - Manual (Page 58)

Scanning 2
C451 2-19
2
Note
By directly selecting a page, the image of the selected page is rotated by
180 degrees.
Preview - View Pages - Change Setting
The following settings specified before scanning the original can be
changed.
The new settings are applied to the originals scanned after the change of set-
ting.
[View Finishing] The specified settings appear as icons and descriptions in the pre-
view image. To remove the icons and descriptions and display only
the image, touch [View Finishing] to deselect it.
[Change Setting] Touch this button to change some of the settings specified before
the document is scanned. For details, refer to “Preview - View Pages
- Change Setting” on page 2-19.
Item Description
Parameter Description
Basic - Document Select whether a single-sided or double-sided document is to be
scanned. If “Cover + 2-Sided” was selected, “Cover + 2-Sided” can
also be selected.
Basic - Binding Position This item can be selected when the destination of “E-Mail”, “User
Box”, “FTP”, “SMB” or “WebDAV” is specified and “Book Copy” is
not selected.
Basic - Original Size This item can be selected when “Mixed Original” is specified.
Application - Frame
Erase Specify the width of the area to be deleted from around the edge of
the document.
Application - Center
Erase When [Center Erase] appears and is able to be selected, Center
Erase can be specified.